LED lights illuminating different colors on a Linksys WiFi range extender may seem attractive. But, trust us, they are not! Especially when the LED light is red. We do not need to tell that the red color depicts danger and the same is the case in relation to your Linksys extender. If your Linksys extender is blinking red, it is a matter of concern. No matter whether you have gone through the Linksys RE6300 setup process or have got your hands on another Linksys range extender model. In this post, you will find some valuable techniques that can be implemented to resolve the red light problem with your Linksys range extender. Keep reading.
Table of Contents
Reasons: Linksys Extender Blinking Red
Before you get down to troubleshooting the issue, you are advised to take a walk through the potential causes behind it. Knowing about them will help you take the command against the issue effectively.
- The range extenderβs LED light depicts the red color if the power being supplied is insufficient. Perhaps, the area where you live is a regular victim of power outages. There is also a possibility that youβve connected the extender to a non-working or damaged socket.
- You might see the red color on the Linksys WIFI range extender if it does not share a steady connection with the main router. Maybe the Ethernet cable connecting both devices has worn out. Also, you never know that the cable connection might have become loose.
- If the firmware of your Linksys range extender is outdated then also you can experience the blinking red light. You must know that the firmware is a kind of software that controls the overall behavior of the extender including its LED status.
Enough about the reasons causing the Linksys extender blinking red light issue! The time has come that we reveal the tips that can help you uproot it in a matter of minutes. But, before kickstarting the actual troubleshooting process, you are suggested to power cycle the range extender. It will prevent your extender from falling victim to network glitches that even possess the ability to stop you from accessing the Linksys extender login page. Power cycling involves powering down the range extender and connecting it back to the power source after a gap of 15 minutes. After that, you can go about the troubleshooting process.
Solved: Linksys Extender Blinking Red
Given below are the techniques that you should follow if you are seeing the red light on your WIFI range extender powered by Linksys:
- Make sure that your WIFI range extender receives an optimal power supply always. It is only possible if you connect it to a wall socket that is in a working state. Apart from this, you have the liberty of putting a UPS to use if your area suffers from random power outages.
- Check the connection status of the Linksys extender and the main router. Is the connection finger-tight? Have you established the same using a non-damaged Ethernet cable? In case the first question has been answered in no, you should make the connection finger-tight. If it is the second question that has received a negative response, you are suggested to replace the cable. And yes, you need to fulfill the condition of a finger-tight connection.
- The time has come you equip your WIFI range extender with the latest firmware version. You can do so with the aid of the Linksys WIFI extender setup wizard. All you have to do is download the firmware file that matches the extender model you own and access the extender.linksys.com login URL. After logging in to the extender, upload the firmware file and let the process get completed.
The Final Thought
Witnessing the Linksys extender blinking red light issue is a common thing. But, resolving it is even easier. However, you can only do it if you have the correct hacks in your hand. We hope that you will be able to fix this issue easily with the help of the troubleshooting tips highlighted above.
