Many users aren’t aware of the next step after completing the Linksys extender setup process. But, those who do, often complain that they cannot connect their client devices to the Linksys extender WiFi network. Well, the process of connecting a client device to the extender’s network is not a lengthy one. It is not difficult too. The user only needs to search for the extended network name of the extender on the network list of the client device and input the WiFi password after selecting it. Users who fail to do so, get refrained from accessing extender.linksys.com URL on their wireless client devices. The reason being, it is important to stay connected to the extender by any means in order to access the web-based setup wizard.
Well, we’ve explained the problem enough. Now, it is time to have a look at the hacks to fix it. But, before you take a major step to address it, you are suggested to learn the reasons why you are unable to connect the client device to the Linksys range extender.
Table of Contents
Why You Can’t Connect Client Devices to Linksys Extender?
If you successfully want to connect your client devices (laptops, tablets, or mobile phones) to the extender’s WiFi network, you are supposed to fulfill a major condition. The condition of being present in the range of the signals emitted by the WiFi extender.
Therefore, if you are attempting to connect to the Linksys extender’s WiFi network outside its signal range, then you should come a little closer so that your device gets internet access. Once done, refresh your network list and see if the extender’s WiFi name shows up on your screen and if you can connect to it or not. If not, then taking the help of the next section is a wise thing that you can do.
Solved: Can’t Connect Client Devices to Linksys Extender
- Use the Correct WiFi Password: There is a possibility that you can see the extender’s WiFi name on the client device’s network list but cannot connect to it due to the wrong password entrée. Thus, you know what to do in this case. Simply, make use of the correct WiFi password of your range extender and see if you can connect to it. While entering the password, make sure that you are attempting the connection with the correct frequency band and that the password you’ve entered is correct.
- Restart the Extender: There are chances that your extender has become a victim of technical glitches that are stopping you from connecting your client devices to its network. For your information, these glitches possess the power to prevent you from completing the Linksys extender login process even on a wired client device. Do you want this to happen? Of course not! For this, you are advised to power down the range extender. Now, you are supposed to wait for 15 minutes. After waiting enough, you can switch it on and connect your client devices again to verify if the problem has been resolved or not.
- Change the Extender’s Location: Many users are unaware of the fact that the extender needs to be placed in a perfect place if you want it to work efficiently. Perhaps, you have not placed the extender at an optimal location due to which you are unable to connect your devices to its network. Thus, you should change the extender’s location at the earliest. While you do so, make sure that you keep your extender in an area where there is minimum signal interference. Apart from this, ensure that you are not placing the extender in a corner or in a space that lies near a thick concrete wall.
The Bottom Line
Numerous users cannot connect their client devices to the Linksys extender WiFi network and that is all OK. With the help of a few universally applicable troubleshooting tips, you can easily fix the issue. We are now hopeful that you have had success in connecting your client devices to the extender’s network successfully. In case you fail, go for Linksys extender reset and set up the extender again either through the manual method, the Linksys app, or the WPS approach.
