Are you facing problems accessing the administration portal of the WiFi router through its default web address? Yes? You should try to use the default IP address then. If you are thinking about the firmware update through the IP, then go ahead. Keep in mind that no matter whether you use the router’s default web address or the IP address, the main aim is to reach the web-based management panel to complete the firmware update process. But, the default IP address is different for different routers. For example, some routers run on the 192.168.1.0 IP address while you need to access 192.168.1.1 for some routers.
The value of the default IP address of the WiFi router holds a great value. You can take the notes of the same from the user manual of the router model you own. Apart from this, you also have the liberty of checking the product’s label. After taking notes of the IP address, you can move ahead to install the latest firmware version on the router. But, before that, you must to download the firmware file from the router’s official support site. In the next section, we’ve highlighted some common steps that you might need to follow to download the file.
Table of Contents
How to Download the Router Firmware File?
- Open a web browser on a computer that is functioning on the latest OS version.
- Visit the official support site of your router. For example, visit netgear.com if you have a Netgear WiFi router.
- There, find the Support link and click it.
- Now, you will be asked to input the model number of the product you own.
- You will see the list of firmware versions released for your wireless router.
- Choose the latest one and download it.
- You might be asked to unzip the file. So, do that if asked for.
Successfully downloaded and saved the firmware file for your router? You can install it on your router’s setup wizard now. The next section will cover A-Z instructions to update the WiFi router’s firmware successfully.
How to Update Router Firmware Using IP?
Remember that the firmware of your WiFi router can be updated only if your client device (computer or laptop) is connected to its WiFi network i.e. Netgear WiFi in the case of Netgear WiFi router. Is your computer connected to a ABC WiFi network? Here, we are using ABC for a random WiFi network. If it is true, then join your computer to Netgear router WiFi network. You can also cable your router to the computer. After that, you can use the following steps to update the firmware of the router through its default IP address.
- Open a new tab on your computer.
- Go to the address bar of the browser and type the default IP address of the router.
- Press Enter.
- You will see two blank fields labeled Username and Password on the next screen.
- Type the correct value of your WiFi router’s admin details.
- Click OK or Log In.
- The dashboard of your WiFi router will show up.
- Locate Management.
- Click Firmware Update.
- Now, browse and upload the firmware file that you’ve downloaded on the PC.
- Wait and let the process get completed.
In this manner, you can update the firmware of your wireless router with the help of its IP address. Just in case, you have lost the user manual of the router or don’t even have a router label available on its hardware, consider experimenting with different IP addresses. You can also use the 192.168.1.254 IP address that allows access to a plenty of WiFi routers. Apart from this, you also need to know that that menus and options given in the aforementioned instructions may vary according to your WiFi router model.
The Final Note
That’s all about updating the router firmware through its IP address. We hope that you have not only learned that the firmware can be updated via IP. Moreover, you also came to know how to go about the process in an easy way.
