If you’re a homeowner with a basement or crawlspace, a sump pump is an essential device for your house. You don’t want your house to get submerged in case of flood and what’s the best precautionary measure to save your house from water or flood? Sump pump installation.

Purpose of Sump Pump:

You must have been wondering what is the reason behind installing a sump pump and why is it so important. A sump pump smartly detects if there is water in your basement or any other below-ground space, and pumps it away from your house. It protects the house’s foundation from ruining because of high moisture levels. 

If a sump pump is not installed and water peeps into your basement, expect serious damage incoming. Water harms the infrastructure of the house massively. It creates favorable breeding conditions for mold, and it weakens the base of your house leading to unstable infrastructure. However, with sump pump installation the groundwork of your house remains dry and free from molds. 

Average Cost of Sump Pump Installation:

The average cost of sump pump installation is a bit expensive, especially if you’re installing it for the very first time in your house. For first-time installation, a lot of drilling and labor is required thus it costs a lot too. The average cost lies somewhere between $300 to $5000. If you’re dealing with a completely new system it can be priced up to $5500 but if you only need some units, it goes down to even $300 per part. 

Factors that Determine the Cost of Sump Pump:

The cost depends on lots of factors, with varying factors, price varies too. Let’s look into different factors that totally change the price.

Type of Sump Pumps:

There are 2 types of sump pumps that influence the costs massively. These are pedestal sump pumps and submersible sump pumps. Pedestal one is rather cheap as compared to a submersible because a submersible pump uses advanced equipment that increases the value of the pump. The installation cost of a pedestal sump pump starts from $800.

On the other hand, submersible sump pumps are waterproof and they have noise-canceling abilities that make them less noisy. They can withstand large pressure of water and pump it all away without getting rusty. So, with all these features comes a big price tag.

Location of Installation:

Another factor that has a huge impact on the average cost of sump pump installation and repair is the location where it is being installed. Depending on the area like basement, crawl space, or outdoors, price changes. 

A sump pump is specifically designed to be used in basement or crawl spaces that are prone to water damage. If proper installation and the best set of units are used, you can sit back and relax because your house will remain mold-free throughout every season. When it comes to the basement, professionals have to dig spaces to go deep in the basement for installation thus the cost is a bit pricey starting from $3000 and ending somewhere near $4500.

When it comes to crawl spaces, dealing with them is a difficult job. Working in crawl spaces takes a lot of time considering the size and area, which in turn increases the cost of installation. The height of crawl space in most homes is around 3 to 4 feet, this means that advanced-level tools can’t be used in such spaces so installers have to manually dig out the space. That is the reason it is expensive compared to the basement installation. The average cost of sump pump installation in crawl space starts at $3900 and the maximum cost is around $5500.

Performance Ability of Sump Pump:

The key factor that determines the cost of a sump pump is its ability to perform. If you reside in an area that remains dry mostly and gets minimal rainfall then even a small-sized pump is good to go. However, if a small pump is installed in areas with the highest moisture then it will fail badly. So, choose the appropriate sump pump considering the rainfall check and dryness check in your area. 

Three pump sizes that are usually used are as follows:

• .25 horsepower: if you live in an area that remains mostly dry, then this is the best option for you. It is the smallest of all but it can work perfectly fine if your home is in a location that receives minimal rainfall. It costs from $65 to $175.
• .33 horsepower: A medium-sized pump that is the most preferred option for most homes. This .33 horsepower pump has costs ranging from $70 to $550.
• .5 horsepower: This sump pump is known as the strongest fighter. It can pump away 3000 gallons of water without any issue. If you live in an area that gets soggy a lot, this is perfect for you as it can keep your home dry through every season. It has a cost range that starts from $100 and ends somewhere near  $400.

Professional Installation or DIY:

A sump pump installation can be possible if you want to do it yourself but it is always better to hire a professional for this task. The installation involves a lot of digging that needs expert tools and equipment so it should be left in the hands of professionals. The sump pump installers charge on an hourly basis, it varies from company to company. The average cost of sump pump installation done by a professional is between a minimum of $50 to a maximum of $300. It depends on the amount of work required and other facts. 

If you prefer to do it yourself, then the cost gets lowered hugely because it only involves the cost of buying a sump pump. Installation is a hectic job so make sure that you have enough tools for digging and doing the work perfectly.

Conclusion:

It is always recommended to get a sump pump installed in your home to save your basement or underground areas from overflowing water. Water is an enemy to your home, take it away by installing a good quality sump pump. It is better to hire professionals for this task as it requires labor and a lot of digging however if you’re trained enough you can do this task yourself. This article has covered all the main aspects that can vary the price of a sump pump installation. So, go and make the walls of your home dry and happy!